This 993mm wide (39inch) Bio Ethanol Fire Ribbon Burner uses clean burning liquid bio ethanol fireplace fuel to provide up to 6kW of heat. The tray is supplied with a safety tray and is manufactured from high quality brushed stainless steel. This modern bio-ethanol ribbon fire includes special matting which improves the flame quality and extends the burn time – saving fuel. The burner has been designed with a large glamorous flame and with a tray capacity of 3 litres and will burn for approx hours 4 hours on full. The burn time can be extended by partially closing the lid to reduce the flame size, also saving fuel and reducing the heat output. This burner tray is available with a wide range of standard single or double sided enclosures in various finishes. Overall Dimensions = 993mm W x 193mm D x 50mm H.
- TRAY CAPACITY: 3 Litre Max
- WARNING: The safety tray supplied with the fire must be used.
- WEIGHT: Approx 20kg
- RUNNING TIME: Up to Approximately 3 hours.
- HEAT OUTPUT: up to approximately 6kw.
- ENCLOSURE: A 400mm (H) x 1200mm (W) letterbox style, single or double sided enclosure is available at checkout.
The standard single sided or double sided enclosure has an opening size of 1200mm wide x 400mm high x 300mm deep. Enclosures are available in brushed, polished or black steel. The enclosure has the safety tray built in. A full technical drawing and guidance on designing the fireplace, installing and using the unit is available by calling 01325-301020. Bespoke and see through versions are available upon request.The tray is suitable for use in custom designed fireplaces or can be purchased with our standard enclosure. The enclosure is available in either a single sided or double sided style (creating a see through fireplace). Bespoke enclosures are available upon request. The video shows the tray within our standard black steel enclosure.
During installation the safety tray must used an this must be recessed into base. As this is a bio ethanol fireplace the fuel quality, ambient conditions and enclosure design can all affect the performance of the burner hence the heat outputs and running times quoted on this web site are approximate values only. When using this burner tray in a custom design fireplace the fireplace must be made of non-combustible materials with clearances to combustible materials. Consult the installation booklet supplied with the tray and building regulations. No building work should be started until the tray is on site and the installation instructions have been received and consulted. Once an order is placed a copy of the install booklet can be emailed in advance if required. The burner is supplied with assembly and safety instructions. For guidance on designing the fireplace call 01325-301020.TECH DRAWING
FIREPLACE DESIGN : The ribbon burner was design to be used in a fireplace enclosure – it is shown below in our standard black steel enclosure. Use of the tray in any other type of enclosure design may affect the performance of the burner. We accept no responsibility for the safety and performance of the ribbon tray when it is not used in our standard enclosure. The burn time and heat output can vary depending on the design of the enclosure and the quality of the fuel that is being used. The running times we have recorded are taken from testing the tray within our standard enclosure, using our own fuel brand in a fireplace test room.
As this is a bio ethanol fireplace it cannot be expected to perform like a gas fire. Once the fire is lit the flame will take around 15 minutes to reach optimum visual performance. During the start up period the flame will be blue and gradually change to yellow. Once the fuel starts to run out the flame quality will deteriorate and become unsteady and patchy, this is normal. It should be considered there is a 15 min start up period, then an optimum period of flame performance, then a 15-30 minute period where the flame is dying out.
How to Order: Buy online here or call our Sales team on 01325-301020, Monday to Friday 9am to 6pm to discuss the technical specifications, installation requirements and to place your order. You can also visit our FIREPLACE SHOWROOMS where we have bioethanol fireplaces on live display. Bioethanol fires can be purchased at the showroom along with fuel. We also sell ex-display and end of range products from the fireplace showroom. The Spirit by CVO range of flueless bioethanol fireplaces includes all design styles including both manual and remote control bioethanol burners. Our remote control bio burners are available in sizes from 660mm to 1800mm wide. We also provide a bespoke design service upon request. If you have any issues ordering from the site – please call us.